Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-25-2013, 10:57 PM
MikeyOrange88 MikeyOrange88 is offline
TT Enthusiast
 
Join Date: Jul 2012
Boat: 1988 Tristar 190 Sport (Closed Bow), 351W w/ GT-40's
Location: Southeast
Posts: 200
DiversiTech Locking Aluminum Ball Mount

Does anyone have any experience with the Diversitech Locking Aluminum Ball Mount linked here?
http://www.trailerhitchsource.com/Ba...all-Mount.html

They are a bit pricey, but it would eliminate the need for a separate hitch pin, or locking hitch pin in my case, as I would like to use a stainless steel ball with it. Pretty sure without a hitch pin lock I wouldn't have it very long. The ball mount is rated Class 5, 2000 lbs tongue load and 14,000 lb. tow rating. The keyed lock is built in and projects pins out each side to secure the hitch to the receiver.

Second choice might be a standard ball mount, but chrome plated instead of the standard black powdercoat. Just wonder if the wear of the ball mount against the receiver would wear through the chrome, making it flake off, etc. Separate hitch pin needed.

Third choice would be a standard ball mount made of stainless steel. I have no doubts about the finish on one of these, still would need separate locking hitch pin though.

Any comments or experience with either of the above would be welcomed.
__________________
1988 Tristar 190 Sport, 351W w/GT-40's, 1:1 Velvetdrive
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:43 AM.