Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #1  
Old 09-25-2013, 10:23 AM
nascar nascar is offline
TT Enthusiast
 
Join Date: Sep 2006
Boat: 1986 skier / prostar , Prostar190 , 1994 sold
Location: Southeast
Posts: 222
Muffler straps on 1986

I am going to replace the mufflers on my 1986 skier and two of the black straps that hold the mufflers in place are broken . How hot do mufflers get ? Do you think I could use those black rubber bungee cords and remove the "s" hooks so I could screw them in place ? thanks in advance for advice
Reply With Quote
  #2  
Old 09-25-2013, 05:34 PM
MikeyOrange88 MikeyOrange88 is offline
TT Enthusiast
 
Join Date: Jul 2012
Boat: 1988 Tristar 190 Sport (Closed Bow), 351W w/ GT-40's
Location: Southeast
Posts: 181
On mine, and a couple other late '80s that I've seen, the fiberglass mufflers were strapped to the side of the bilge with what appeared to be pieces of the plastic rub rail insert, or something similar. I would think that a rubber bungie cord would be an acceptable substitute to use. If they are getting hot enough to cause issues with either of those materials, then you have another issue going on that is causing too much heat. The mufflers should be fairly cool to the touch as there is water exhausting with the engine exhaust.
__________________
1988 Tristar 190 Sport, 351W w/GT-40's, 1:1 Velvetdrive
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:16 PM.