Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-23-2013, 07:23 PM
CraigV CraigV is offline
TT Newbie
 
Join Date: Sep 2013
Boat: Mastercraft, X-14, 2008, Vortec 6000
Location: Westcoast
Posts: 1
Check engine 08 X-14

Hi everyone. I've got an 08 X-14 with the big Vortec. When starting it up in the water after sitting for a couple of weeks, the engine kind of sputtered and the rpms dropped and rose several times over about a 30 second period. It then ran perfect for the rest of the day. After a great day of surfing around the lake I decided to give it a good boot to burn some gas that I didn't want to tow home. After about ten minutes of going pretty good, the check engine light came on. I cleared it and there didn;t seem to be any issues at all. Took a peak at the engine, no noises, nothing burning. Engine temp was good, voltage was fine. Any thoughts on either? I've read a few things about adding fuel stabilizer tot he tank if it will be sitting for a bit and I'm wondering if this had something to do with starting it up.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:57 AM.