Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-18-2013, 02:31 PM
prostardad prostardad is offline
TT Newbie
 
Join Date: Sep 2013
Boat: 1992 MC Prostar 205
Location: Southeast
Posts: 6
1992 Prostar 205 Oil and Fuel Gauge

I just purchased a 1992 MC Prostar 205. The oil and fuel gauges do not work. The volt meter and engine temp gauge work fine. The previous owner said the sending units were bad. I replaced the oil sending unit, but the gauge still registers 0 psi. The oil level is fine. I have not tested the oil pump yet. I hear a faint audible squeal when the engine is running. Itís coming from a circuit board behind the dash.

Is the noise a low oil level warning or something else?

What are the other causes for the gauge to read 0 psi?

How would I check to see if the gauges are bad?

Is there a common ground that the oil and fuel gauges use and maybe corroded?

Thanks for helping.
SWH
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 06:02 PM.