Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Reply
 
Thread Tools Display Modes
  #1  
Old 09-01-2013, 10:36 PM
blackTT blackTT is offline
TT Enthusiast
 
Join Date: Sep 2011
Boat: 08 tournament team LYR6
Location: australia
Posts: 123
Ballast pump switch

Ok guys this could be hard to explain bit I will try.

My 08 tournament team, the ballast pump switch has died in me. I got a new one which was told is the only one there is. The old switch (fill/drain) has 7 'prongs' and 7 wires. The new switch has 8 prongs. I can't get it to work or find a wiring diagram.
Reply With Quote
  #2  
Old 09-01-2013, 10:43 PM
MLA MLA is offline
TT Enthusiast
 
Join Date: May 2012
Boat: pontoon
Location: Lake Wylie Area
Posts: 428
If its a Carling switch, the major difference between the 7 and the 8 pin is that pin #8 is a dedicated B+ for the switch illumination. #7 is the ground for the LED and the other 6 are the same.
Reply With Quote
  #3  
Old 09-01-2013, 10:54 PM
blackTT blackTT is offline
TT Enthusiast
 
Join Date: Sep 2011
Boat: 08 tournament team LYR6
Location: australia
Posts: 123
Ok brilliant... I will give it a try tonight
Reply With Quote
  #4  
Old 09-01-2013, 10:55 PM
blackTT blackTT is offline
TT Enthusiast
 
Join Date: Sep 2011
Boat: 08 tournament team LYR6
Location: australia
Posts: 123
Hang on.... So do I have to add another wire or how do I get it work correctly with only having 7 wires
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 11:47 AM.