Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #36  
Old 08-20-2013, 02:21 PM
mramerman@gmail.com's Avatar
mramerman@gmail.com mramerman@gmail.com is offline
TT Regular
 
Join Date: Nov 2010
Boat: current: 2010 X14v, 350MCX - former: 1997 PS190 w/ LT1
Location: Northwest
Posts: 339
Update

Well the project is complete. Overall it was not a terribly difficult process.

Removing the existing Reliable actuator involved disconnecting brake line, reverse shut out wire and the ground wire. Once those were disconnected, taking the actuator off was easy---one bolt.

We had a friend who owns a body shop paint match the new UFP actuator sleeve. We reconnected the brake line, reverse shut out wire and ground. We added brake fluid and then bleed the brakes. Bleeding was probably the toughest--we couldn't get a good seal using the vacuum system so we had to do it the old fashion way.

Please note, the new UFP actuator is longer than the existing Reliable. Safety chains etc., are plenty long for the new set up.

I do like the attachment mechanism better than the Reliable option.
Attached Images
  
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:30 AM.