Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #1  
Old 08-20-2013, 01:25 AM
205er's Avatar
205er 205er is offline
TT Regular
 
Join Date: Aug 2013
Boat: 1992 MC 205 ProStar 351
Location: WA
Posts: 62
Broken shaft-has this happened to anyone?

I was cruising along last Wednesday at approximately 30 mph when I felt a slight bump, then it was like the boat was in neutral. Everything was fine, except no thrust. After getting a friend to tow me back to the dock, we discovered that the shaft had broken right in front of the prop. No major event like hitting a log or running aground preceded the shaft breaking. Over the 21 years of the boat's life I've wound a couple ski ropes around the prop, causing it to stop cold, and I've dinged the prop a couple times on my boat lift. But nothing worse than those events. Also lost was my $415 Michigan Wheel Ambush prop.

After getting the boat into my garage and pulling the shaft, I rolled it on the garage floor to see if it was bent. The shaft seemed to be dead straight.

Has anyone ever heard of this happening before? The boat is a 1992 ProStar 205, standard 351 Ford engine with 1:1 Velvet Drive. The shaft is 1" diameter and is heavy duty steel. Was it a manufacturing defect that took two decades to fail?
Reply With Quote
  #2  
Old 08-20-2013, 01:54 AM
FrankSchwab FrankSchwab is offline
MC Devotee
 
Join Date: Aug 2004
Boat: 1998 Maristar 200VRS
Location: Phoenix, AZ
Posts: 1,559
I see reports of this once a year or so, a quick search finds:

1999 205V
1983 MC Skier
2007 X-2
2003 X-10

Good luck,
/frank
__________________
1998 Maristar 200VRS
Reply With Quote
  #3  
Old 08-20-2013, 08:43 AM
mikeg205's Avatar
mikeg205 mikeg205 is offline
Moderator
 
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 11,659
Send a message via Skype™ to mikeg205
This just happened in northern illinois... prop shaft broke right before prop...
__________________
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
  #4  
Old 08-20-2013, 09:30 AM
TRBenj TRBenj is offline
MC Devotee
 
Join Date: Dec 2005
Boat: 1990 Ski Nautique
Location: NWCT
Posts: 1,149
When was the last time you performed a powertrain alignment?
Reply With Quote
  #5  
Old 08-20-2013, 09:52 AM
76S&S's Avatar
76S&S 76S&S is offline
MC Devotee
 
Join Date: Jun 2007
Boat: 2002 X Star
Location: At the lake or on the way to the lake!
Posts: 1,842
Happened to me on my old S&S. Turned out that I had much bigger issues than just a broken shaft.
__________________
Being on the water is best, but when I'm not on the water I'm on TT.

2002 X Star
Sold - 76 S&S
Reply With Quote
  #6  
Old 08-20-2013, 10:10 AM
AZDave's Avatar
AZDave AZDave is offline
TT Enthusiast
 
Join Date: Dec 2006
Boat: 1993 Stars & Stripes Prostar 190 351 285 hp
Location: sw
Posts: 272
It happened on an 89 powerslot at our lake. The prop was retrieved about 6 months later by another member who kept insisting he would find it,
Reply With Quote
  #7  
Old 08-20-2013, 10:15 AM
chriscraftmatt1976
Guest
 
Posts: n/a
Yup, happened to a buddy's ski supreme. Check alignment for sure. Strut bushing too.
Reply With Quote
  #8  
Old 08-20-2013, 11:12 AM
TxsRiverRat's Avatar
TxsRiverRat TxsRiverRat is offline
MC Maniac
 
Join Date: May 2011
Boat: 93 Prostar 205
Location: Southwest
Posts: 3,734
I thought I broke my shaft once but I was ok once I sobered up
__________________
What does the fox say?

Ring-ding-ding-ding-dingeringeding...

You know they all have a little string hanging out, but it's not a tampon, it's a price tag...
Reply With Quote
  #9  
Old 08-20-2013, 03:41 PM
MikeyOrange88 MikeyOrange88 is offline
TT Enthusiast
 
Join Date: Jul 2012
Boat: 1988 Tristar 190 Sport (Closed Bow), 351W w/ GT-40's
Location: Southeast
Posts: 211
Several years ago now, my prop shaft (1" dia. stainless) broke clean in two on my '88 Tristar also, although I didn't lose the prop.
I attributed it to a full speed manatee strike that happened several months previous (end of summer to next spring) so there was a long time between the strike and break, but not much motor time. The strut had an ever so slight bend in it (as I came to discover later), creating a stress to the shaft, but no damage to the prop blades at all, hence my thought at the time that no damage was done. I filed a claim with my boat insurance and they covered it. Replaced strut, shaft, cable, packing, and reconditioned prop.

When it gets replaced the strut, shaft log, and alignment should all be checked and brought into specs.
__________________
1988 Tristar 190 Sport, 351W w/GT-40's, 1:1 Velvetdrive
Reply With Quote
  #10  
Old 08-21-2013, 03:13 PM
blackcreek blackcreek is offline
TT Enthusiast
 
Join Date: Aug 2006
Boat: 1997 prostar 205 lt1
Location: Jacksonville Fl
Posts: 207
Exact same thing happened to me except the shaft broke with a bang. Mine broke right in front of the strut bearing. Turns out my strut was slightly bent by previous owner causing a slight bending force on the prop shaft. The shaft only needs to be out of alignment a very small amount to cause problems over the long run. If you never checked your alignment over the life of the boat I imagine sagging engine mounts or even small bumps on the strut could cause enough misalignment to cause flexing of the shaft. My broken shaft was straight and had a clean cut just in front the strut bearing. The shaft will flex a bit without bending but I guess it's just like bending a piece of metal over and over, eventually it breaks. Cost me a new strut, prop shaft, and a prop rebuild to make it right. I spent an entire afternoon getting the alignment perfect on the install.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:28 PM.