Folding Tongue Stuck
I was backing my "new" boat into the boat house just enough to fold the tongue on the trailer and have a little extra space behind the boat. When I went to pull the pin, apparently it was rusted in place as it has obviously not been used in a while, if ever. I tried to break it loose with a hammer and it didn't budge. I tried to slip a pair of pliers in the top ring to twist it loose and the ring broke. I sprayed it with WD-40 and let it sit for a little bit then tried to knock it loose with a 3lb sledge with no luck. I also tried to remove the bolt on the other side but had the same problem with it. Has anyone else had this problem? I am open to suggestions. Thankfully it fits in the boat house without having to fold it, but I am using nearly every inch.