Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-21-2013, 11:24 AM
College Kid's Avatar
College Kid College Kid is offline
TT Enthusiast
 
Join Date: Jan 2012
Boat: 93 Prostar 190
Location: St. Albert, Canada
Posts: 169
First Start of the year, ran but then stopped. (Flywheel needs replacement)

Hooked everything back up, put in plugs etc.

After a few pumps of the throttle the engine fired right up. There was some pretty bad belt whine and realized I had not re tightened the belt via the alternator.

I tighten it up, go to start the boat, has a bit more trouble but fires up.
Let it run for about 1 min, shut it down to add some belt dressing, then go to re start and won't fire up.

I can hear the engine spinning, but the pulleys don't spin or run at all. Almost seems like they aren't connected.

Looking for thoughts and ideas to check??? I am headed back out to try it again with the belt looser

Last edited by College Kid; 07-25-2013 at 06:53 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:17 AM.