Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-14-2013, 08:23 AM
HartlandX1 HartlandX1 is offline
TT Enthusiast
Join Date: Mar 2012
Boat: 2007 Mastercraft X1
Location: Midwest
Posts: 127
Added pump to existing swith and wiring, runs 5 seconds and stops

2007 x1 originally had two rear pumps. Had a third switch that wasn't being used but was wired. Added a third pump and connected wiring. When I run the pump it works for 5 seconds then shuts off and the light blinks. I know there is water pumping for those 5 seconds because I have quick disconnects and pumped water out for those five seconds. Brand new pump. Any ideas? Thanks

Last edited by HartlandX1; 07-14-2013 at 08:24 AM. Reason: Spelling
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 12:11 PM.