Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Restorations and Refurbishments

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-03-2013, 09:29 AM
Table Rocker's Avatar
Table Rocker Table Rocker is offline
MC Devotee
 
Join Date: Oct 2010
Boat: '96 ProStar 205, Sammy Duvall, LT-1
Location: Fayetteville, Arkansas
Posts: 1,637
Quote:
Originally Posted by hig View Post
I tried to have a prop puller made at work but I have to modify the bolt spacing to clear the prop. I really want to get that shaft log removed so I can see the damage and check the shaft to see if it's bent. It was raining so I did not get outside much tonight.

Can someone tell me if the sending unit in the upper left hand corner is stock or does it go with that aftermarket warning buzzer I found?



Thanks, Steve
My sender is not in that location and it doesn't look like what I would consider a "good" location. That is the return for the heater and would have very poor water flow past the sender, especially being on that length of hose. I am pretty sure mine is on the starboard head. I would get you a pic, but my boat is at home and I am on St. George Island until Saturday. Hopefully someone can help out.

It is quite possible that it goes to your buzzer set up, I have no idea. If you have the one on the head and the other that we see on the pump, then it is an add on.
__________________
'96 ProStar 205 SD LT-1
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 12:59 AM.