Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Upholstery

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-03-2013, 01:28 AM
WalloonPS190 WalloonPS190 is offline
TT Newbie
 
Join Date: Aug 2011
Boat: 2001 ProStar 190 EVO, LTR 330
Location: Midwest
Posts: 6
'01 PS190- bolts have detached/unglued from top of throttle panel

I did some searching but only found references to throttle panels which have holes of some sort clear through the panel. On my '01 PS190 EVO, the bolts have a flat, thin head with holes in it, which is (was) glued to the inside of the panel. There are no holes through the top of the panel itself. The other day I noticed the panel sort of flopping in and out, and determined that the front two (of the three) bolts had broken off of the glue. I am grinding the remaining bits of glue ground off of the loose bolt heads. Wondering if I should try grinding or breaking the large "dabs" of glue off the panel, and reattach the bolts with some sort of epoxy? Any special type? All advice much appreciated.
__________________
__________________________
2001 ProStar 190 EVO, LTR 330
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 11:55 PM.