Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-29-2013, 02:35 PM
SWGA Boater's Avatar
SWGA Boater SWGA Boater is offline
TT Enthusiast
Join Date: Oct 2012
Boat: Not a MasterCraft
Location: Southwest Georgia
Posts: 203
Ran engine this morning. Checked to ensure that I had good vacuum on the PCV hose and that the PCV was opening. It was. No oil coming from the dipstick tube. Does not do it in the yard with engine 1500 rpms plus. Forgot to take a picture, but my setup is like this:

Also took a video of the engine running:

Excessive smoke, running rich or possibly water related? Remember it did run hot earlier. Could a blown head gasket do this and be my crankcase problem? No skips or rough idle or running. Compression seemed good. Look specifically about 20-25 secs and you can see excessive oil in the exhaust water on the concrete.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 04:23 PM.