Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 06-22-2013, 12:28 AM
wheelerd's Avatar
wheelerd wheelerd is offline
MC Fanatic
 
Join Date: Dec 2007
Boat: 2005 X2
Location: Central Alberta, Canada
Posts: 908
My install was an OEM 2-duct Heatercraft unit that I brought on Ebay from an MC owner who never had his installed.
You can see the edge of the heater core in the pic behind the battery. The visible hose comes around the battery to a hot tube under the observer's seat. The second hose which you can't see goes under the walkthru to an outlet at the driver's feet.
The hoses to and from the engine go under the floor through a cutout that was already there. You can barely see one on the bow side of the core. (The hose between the amps is the fresh air intake for the bilge.)
Attached Images
 
__________________
"For every complex problem there is an answer that is clear, simple, and wrong." (Henry Louis Mencken)
2005 X2, Viper Red, MCX, Acme 1285, PPass, rear 750 sacs, KGB, IBS, Bennett Wake Plate
(previous) 2001 X5, 1991 TriStar 190
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 12:54 AM.