Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-12-2013, 11:35 PM
Miss Rita's Avatar
Miss Rita Miss Rita is offline
MC Fanatic
Join Date: Jul 2009
Boat: 1992 ProStar 205, 1991 Ski Pro
Location: Black Hills
Posts: 956
it looks like you put the 'Y' pipe on the wrong side of the raw water pump. It should be placed on the intake side where the pressure will be low so that extra water flows through the heater system.
OK, someone needs to explain to me how putting the cold water supply to the heater core on the suction side of the raw water pump will provide any cold water whatsoever. It would seem that if installed that way the impeller will suck water backwards through the heater core. Also, shouldn't there be a mixer valve to mix the cold and hot water together for the right temperature?
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 06:44 PM.