Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-11-2013, 05:45 PM
catamount catamount is offline
MC Fanatic
Join Date: Feb 2012
Boat: 1987 ProStar 190
Location: Vermont
Posts: 500
Question Should there be o-rings at the ends of the "steering tube"?

Today, I replaced my steering cable. It turns so nice and easy now! However, one maintenance question...

Please forgive me as I have no idea what this proper name of this tube is. There are couplings on either end, but no real seal or o-rings under those brass couplings. After pumping the tube full of grease via the zerk and running the wheel back and forth, grease is driven out of either side via the couplings.

To anyone who has replaced their steering cable, did you happen to notice o-rings or seals at either end of this tube? I don't know if this is something the PO lost along the way, or if it's meant to be unsealed. I'm sure I could pick up a couple of o-rings at the hardware store.

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 04:57 PM.