Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-05-2013, 11:18 PM
blakekrone blakekrone is offline
TT Enthusiast
Join Date: Dec 2012
Boat: 1996 Prostar 205
Location: Minneapolis
Posts: 156
Stripped exhaust drain plug threads

So the boat I bought in CA probably never had its drain plugs removed and I had to remove them last fall to dry block the engine before having it hauled back to MN. I went to put back in the plugs today and 1 side went in without any trouble, the other side however doesn't seem like it wants to bite at all. The plugs themselves look a little rough around the edges so I picked up a new 3/4" NPT plug and that won't even bite either. It looks like the manifold was so rusted out that the threads have deteriorated to nothing for the first few turns. Is it worth it trying to rethread with a tap or do I just need to get a new manifold?
1996 ProStar 205
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 08:53 PM.