Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-03-2013, 11:17 AM
Rossterman's Avatar
Rossterman Rossterman is offline
MC Fanatic
 
Join Date: May 2012
Boat: 2001 prostar 205V
Location: Westcoast
Posts: 630
Reinforcing ski lockers for 750lb bags?

Heard that the plastic dividers between the rear lockers and engine will need to be reinforced to use the fly high 750 lb bags in the rear lockers on my 2001 205V. Read some posts on this but they weren't very clear as to what needs to be done. Would in interested in a better explaination and if possible, a pic or two so i get it right. What i deduced from the other posts it the small aluminum L bracket that the sidewall bolts to need to be extended across the bottom ( pick up 2 1/2 ft of alum 2" L channel and bolt across the bottom to replace and extend the existing mounting point). Is this what needs to be done? Are there other reinforcements needed?

Thanks!
Ross
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:44 PM.