Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Underwater Running Gear

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-11-2013, 01:56 AM
skongolf skongolf is offline
TT Regular
 
Join Date: May 2011
Boat: 2001 Mastercraft x-30, 330hp
Location: Southwest
Posts: 95
Prop Strut Alignment

Today I was putting in a new steering cable in my 01 X30 and when aligning the steering wheel I noticed the rudder was about 1" to the left of the center of the prop shaft when looking from the rear. I had my buddy who is a long time Malibu mechanic look at it and said that usually means a bent prop strut. After doing some research on here I came accross a thread that said that the rudders are usually offset about 3/4 to 1" to the port side. Is this true?
The prop strut doesnt look bent, there are no vibrations to speak of while driving and there is no damage to the prop strut. I bought the boat used and have never hit anything with it. Would just like to get some input on the rudder alignment before I go looking for a new prop strut.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 07:39 PM.