Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Audio/Stereo

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-01-2013, 12:29 PM
EarmarkMarine's Avatar
EarmarkMarine EarmarkMarine is offline
MC Fanatic
Join Date: Aug 2010
Boat: TBD
Location: Dallas, TX
Posts: 520
A couple questions...

What grit sand paper do you recommend to sand the fiberglass?

Would "3M/1 gal. Bondo-Hair long strand fiberglass reinforced filler" from Autozone be a sufficient product to use to attach the board to the fiberglass?

Try 80 grit or courser. Just enough to scar an otherwise smooth surface to get a good bond.
Anything with fiberglass strand has some structural integrity and good adherence unlike a plain body filler. And, mix in a polyester resin 50/50. Don't forget the catalyst.
If its the hull surface use intermediate blocks and not the board/panel direct.

Earmark Marine
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 08:40 AM.