Wetsounds Rev 10 mc adapters and swivel mounts

[wetsounds1]

I see. It looks like the hardware pack is for the factory mounts across the top without the add on braces, so for the newer ones. We need the hardware to include some longer ones for older models. These towers have changed so many times over the years. No braces, mid year added brace. Newer ones no brace but closer together and so on. Sorry for the inconvenience. I will have Gyver at my office read the post and get a solution so we can have a hardware pack that covers all years and scenarios.

Tim
Wet Sounds

[cal2vin]

Yea I knew there was a lot if changing around with those braces. The local fastenal has some stainless steel 1/4-20 1.75 inch. Bought the 2 inch too just to see which works best. One of the sizes should be the ticket.

Sent from my DROID RAZR using Tapatalk 2

[cal2vin]

For my application with the tower brace mounts flipped so the deepest recess is facing the tower the 1.75 inch screws were perfect. I havent mounted the inside speakers yet, but Im hoping the difference in drop between the outside and inside Rev 10's will be minimal. Ill post a pic when I get them all installed.