Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Thread Tools Display Modes
Old 08-01-2011, 08:37 PM
bcd bcd is offline
MC Devotee
Join Date: Jul 2011
Boat: 2014 X-2
Location: Dubuque, IA
Posts: 1,244
more pictures
Attached Images
Reply With Quote
Old 08-01-2011, 09:13 PM
bturner2's Avatar
bturner2 bturner2 is offline
MC Maniac
Join Date: Mar 2008
Boat: Maristar 200VRS w/ X2 Package, 2007, 310HP
Location: Brighton, MI
Posts: 3,645
Great post.

I pulled mine apart but water had gotten into the motor from the pump housing which was caused by MC installating the pump with the pump body over the motor. Seal went bad in the pump, then leaks water into the motor.
Reply With Quote
Old 02-01-2013, 06:04 PM
46Chief 46Chief is offline
TT Enthusiast
Join Date: Jan 2011
Boat: 2002 Prostar 209 "Tarbaby", 2001 Prostar 190 Donor "Holestar"
Location: MidAtlantic
Posts: 371
Thanks BCD, tried to bench test both mine today, and they didn't work. So I pulled the bad one apart to explore the innards of a Jasco Ballast pump. I was wondering if you have a pic of the mfg sticker on the front. I don't see why I couldn't try and source a new motor and the info on the sticker should help me determine RPM , HP, and other pertinent info.
Reply With Quote
Old 02-02-2013, 12:29 PM
bcd bcd is offline
MC Devotee
Join Date: Jul 2011
Boat: 2014 X-2
Location: Dubuque, IA
Posts: 1,244
Here are pictures of the motor stickers/numbers. I tried finding a cheaper alternative, but couldn't come up with anything. I also measured the resistance of the motor to calculate a rough current and power. It's a pretty low resistance/high powered motor. Just looking for motors online, I couldn't find anything that looked even close to working. Maybe you will have better luck.
Attached Images
Reply With Quote
Old 08-22-2015, 12:18 AM
jon_76_89 jon_76_89 is offline
TT Newbie
Join Date: Jul 2015
Boat: 2006 x1
Location: south
Posts: 17
Anyone one ever have any luck finding motors?
Reply With Quote
Old 08-24-2015, 03:16 PM
MIHokie MIHokie is offline
TT Newbie
Join Date: Jun 2014
Boat: 2009 X2
Location: Midwest
Posts: 3
Just a note on replacing ballast pumps that I wished I had found...the Johnson pumps run more current than the Jabsco pumps. This wouldn't be a problem except it is enough to trigger the over-current shut off on the Jabsco controller in my 2009 X2. I have replaced my 2 rear ballast pumps over the last 2 years and have not found anything cheaper than Wakemakers. They are now "correct" side up, so, hopefully, I don't have any more problems.
Reply With Quote
Old 03-01-2016, 05:20 PM
JasterCraft's Avatar
JasterCraft JasterCraft is offline
MC Devotee
Join Date: Oct 2011
Boat: 2006 X-2 (my 7th MC)
Location: San Antonio, TX
Posts: 1,275
Great thread. I pulled mine apart and found that it is not fixable. Bummer. Thanks for the help!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 01:36 PM.