#11
|
||||
|
||||
Have you compared the splines from the old prop to the new prop?
__________________
CUSTOM WHEEL & TIRE PACKAGES $125 LED TRAILER LIGHT PACKAGE - FREE SHIPPING REBUILDING HOLLEY MARINE CARBS - $289 DELIVERED REBUILT COMPLETE MARINE HOLLEY 4160 CARBS FOR 302, 351 & 454 STARTING AT $450 DELIVERED Email - [email protected] |
#12
|
||||
|
||||
Okay, this may be a really stupid question but here goes; You're not trying to put a 1" prop on a 1 1/8" shaft are you?
|
#13
|
||||
|
||||
achieved success last night. it was a 2 man job. the end result was I put a mark on the prop and kept rotating prop spline by spline. I finally got engagement and prop went on but it was a long process. I had miked splines on shaft and prop and tolerances were within 20/1000. I used a magnifying glass and saw no burrs on either shaft or prop. all that I can say was it was tight. Eric did me a great Job by sending me a second prop when the 1st one wouldn't go on but fortunately the second one did.......
|
#14
|
||||
|
||||
Success is a good thing!
![]()
__________________
CUSTOM WHEEL & TIRE PACKAGES $125 LED TRAILER LIGHT PACKAGE - FREE SHIPPING REBUILDING HOLLEY MARINE CARBS - $289 DELIVERED REBUILT COMPLETE MARINE HOLLEY 4160 CARBS FOR 302, 351 & 454 STARTING AT $450 DELIVERED Email - [email protected] |
![]() |
Thread Tools | |
Display Modes | |
|
|