Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Storage / Winterization

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-23-2012, 12:39 AM
GoneBoatN's Avatar
GoneBoatN GoneBoatN is online now
MC Devotee
 
Join Date: Oct 2010
Boat: 2010 X-15 w/MCX
Location: Nor Cal
Posts: 1,728
Drain bolts in or out; Teflon or sealant liquid

For those of us who store "dry blocked":

So I'm curious who leaves there drain plugs in or out.

and if you use Teflon (tape?) for a sealant liquid.

So it is my understanding that the threads will rust less if you store with the drain bolts in place. Also I use Aviation Form-a-Gasket from Permatex. It does not harden and I've never had a drain plug freeze in place on me. It coats the threads so it will inhibit rust (my thoughts). I see people mention using teflon tape for their drain plugs and I don't understand what the advantage of doing so (other than a little less mess).

My boat is in a garage that also contains the house heater and hot water heater, in an area not prone to freezing. So I'm not horribly worried about a little water that might have been missed when winterizing. I would not think this to be a concern anyways if you drain correctly.

Let another off season debate begin...
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:49 AM.