header |
|
#31
|
|||
|
|||
|
It all works great!! Luckily the vent line worked out and that was the biggest change from the original picture to the last one I posted.
|
|
#32
|
||||
|
||||
|
I wish I saw this sooner.
I have a 2007 X2 with the fly highs plumbed in the vents for the hard tanks. I NEVER have any draining problems. Only the KGB needs the boat to be moving to empty the hard tank. BOW needs to be in the air. I had to install 20 minute timers. Mine was plumbed similar to how your is originally. Nothing would ever empty correctly. Now 9 minutes to fill stock plus fly high and it works perfectly.
|
|
#33
|
|||
|
|||
|
How hard was it to install the timers? I think I may have to do that over the winter.
|
|
#34
|
|||
|
|||
|
Does anyone know about how to modify the timers. On my tanks, I do cycle the switches 2 or 3 time. Not a big deal, but if it is not a big deal, I would like to extend the timers a bit.
|
|
#35
|
|||
|
|||
|
Just an FYI here - we did have luck with this setup and operation. I just have to cycle the switches 2 or three times when filling. I do have the quick disconnects for the fat sacs. As stated above if I fill everything up (3 factory and 2 fat sacks in back) it drags the back platform. We would fill the KGB and hard and fat sac on one side and had good success.
However, I think it would be even better if I could move the fat sac I'm not using up to the nose. So now I am going to look at splicing the KGB tank and adding a fat sac to the front nose storage compartment. This should help bring down my nose - keeping the ski platform higher out of the water - with more weight overall. I would speculate that my sweet spot would be REALLY big. With the quick disconnects on the fat sacs - it should be real easy to move around the fat sacs. I can't say I'll use the fat sacs for anything else but surfing anyhow. On the X-15 I would speculate it would be easier to do on the drivers side (boat is not close by). Regretfully, I will not be able to report on on the outcome till next year!! |
|
#36
|
|||
|
|||
|
Here are some pics of me installing the front fat sac.
Will |
|
#37
|
|||
|
|||
|
Here are a few more.
Will |
|
#38
|
|||
|
|||
|
This system works great, just have to find a balance point when we are carrying lots of passengers. Anyone else attempt to install a system?
|
|
#39
|
||||
|
||||
|
Sorry, wrong thread
Last edited by XStar08; 11-02-2012 at 04:30 PM. Reason: Deleting... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|