Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-14-2012, 02:58 PM
lbgeary lbgeary is offline
TT Newbie
 
Join Date: Aug 2012
Boat: 1993 Mastercraft Prostar 205 - 351 Ford
Location: Northwest
Posts: 4
Flywheel tooth broken in 351 Ford

Help,

When I couldn't get my 1993 Mastercraft Prostar to start, I removed the starter. There I discovered that one of the teeth had broken off the flywheel where the starter meshes with it. The starter checks out fine. My question is as follows: Is there a way to advance the flywheel before reattaching the starter? I'm hoping to figure out a way around this problem without replacing the flywheel. Any suggestions would be appreciated. Thanks for the help.
Reply With Quote
 

Tags
351, flywheel, mastercraft

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 04:15 PM.