Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 06-19-2012, 02:24 PM
Jerseydave's Avatar
Jerseydave Jerseydave is offline
TT Hero
 
Join Date: Jul 2004
Boat: 2005 X-STAR & 1993 Prostar 190 Limited
Location: Jersey
Posts: 5,397
I've owned 5 different inboards and the X-star is a whole different animal when it comes to loading her on the trailer. (because of the pickle fork bow)

You can power load as suggested only if the ramp is not too steep, otherwise the flat part of the bow tries to go under the boat buddy, plus the boat hits the spare tire too. If the ramp is not steep, put your trailer in so the fenders are just barely under water.

On steeper ramps (like ours) I put the trailer in deep so my suburban's tailpipe is just starting to blow bubbles, then I float it on and winch it the final 1-2 feet. I usually have someone in the back of the boat as I pull out to make sure it's centered between the guide poles. Most of the time it centers itself pretty well.

With most boats with a V-shaped bow just power load and you're done. Takes 30 seconds tops.

What year is your X-star?
__________________
I was njskier on here.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:42 PM.