Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

Reply
 
Thread Tools Display Modes
  #1  
Old 05-05-2012, 11:15 PM
bmw91m5 bmw91m5 is offline
TT Newbie
 
Join Date: Sep 2010
Boat: 2010 MC X30
Location: Southeast
Posts: 9
2010 MC Trailer Reliance Oil Hubs

Anyone know how difficult it is to deal with the bearings on the reliance oil bath hubs on my 2010 MC trailer? I have the tandem never use the trailer except once or twice a year. Less than 100 total miles on it and pulled my boat home form the lake today and all of the oil in each rear hub (it is a tandem) puddled under the rear wheels implying an issue with my seals, races, bearings etc.

I need to determine if I need to just pull off and inspect or take to dealer to deal with. No experience with this hub and wondering if these are any good. Looks like they may have moved to the Vault hub for 2011.

Any insight would be welcome. Thanks.
Reply With Quote
  #2  
Old 05-06-2012, 08:47 AM
93ProStar205's Avatar
93ProStar205 93ProStar205 is offline
TT Regular
 
Join Date: Sep 2004
Boat: 2004 x-10 mcx
Location: East
Posts: 65
e34 M5, eh? Nice choice - looked for an e34 forever but ended up with an e39 M5 and it's the most fun vehicle I've ever owned.

Re: the trailer oild bath hubs, this thread should help. Have to do this at some point, as one of mine is seeping oil as well: http://www.mastercraft.com/teamtalk/...t=40917&page=2
Reply With Quote
  #3  
Old 05-06-2012, 09:35 AM
bmw91m5 bmw91m5 is offline
TT Newbie
 
Join Date: Sep 2010
Boat: 2010 MC X30
Location: Southeast
Posts: 9
Thank you! This is exactly what I needed. E39 is a great car enjoy!
Reply With Quote
  #4  
Old 05-23-2012, 09:52 PM
Dan_Lorenze's Avatar
Dan_Lorenze Dan_Lorenze is offline
TT Regular
 
Join Date: Apr 2009
Boat: Mastercraft 2006 X30
Location: West
Posts: 46
last year one of my hubs started to leak pretty good. It had nothing to do with the plastic cap or oring. My leak was coming from the other side of the hub(on the inside). It turned out to be a bearing seal cap that seals up the oil bath sys on the spindle. You can see cracks in the seal, they just get old. I ended up doing all four and the rubber was cracking on them all. The bearing seals were cheap, and they are also a standard size I found at an RV place. Pretty easy job to do but time consuming.
__________________
2006 X30
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:46 PM.