header |
|
#1
04-12-2012, 07:46 PM
|
||||
|
||||
|
2007 X2 Jump seat or others
I am looking for the optional jump seat for a 2004 Mastercraft x2. The one that sets up in the bow walk through. If nobody has one for sale would you mind posting pictures of it for me. The local dealer says it is NO longer available for my boat.
 So I might have to make it
|
|
#4
04-25-2012, 10:06 AM
|
||||
|
||||
|
I would like to see a picture of one installed...........
__________________
MISS "B" HAVEN 2007 X2, Indmar 350 MCX OJ 13.7 x 15.5 2006 F150 SCrew Puller http://www.crowniehq.net http://banners.wunderground.com/weat.../OR/Albany.gif
|
|
#6
04-25-2012, 10:55 AM
|
||||
|
||||
|
To the OP, check to see if replacement skins for that jump seat are still available. I made one for my old 205 and started by getting the replacement skins. From there, you can reverse engineer the measurements.
To gatorguy, here's my old jump seat. The frame is mostly wood. The countour of the base was done by cutting several strips of 1" thick foam insulation and sandwiching them together. I bound that piece with duck tape and glued it to the side of the frame. Worked like a charm.
__________________
Previous: 1993 Prostar 205 Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG. FAQ Tyler Ski Club To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball. Last edited by east tx skier; 04-25-2012 at 11:00 AM.
|
|
#7
04-25-2012, 10:56 AM
|
||||
|
||||
|
I had a step on the other side as well. I added a second cup holder later. Probably the best mod I ever did. It was heavy, which meant moving it in and out of the boat was a pain. However, there was never much need to move it in and out of the boat.
__________________
Previous: 1993 Prostar 205 Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG. FAQ Tyler Ski Club To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball. Last edited by east tx skier; 04-25-2012 at 10:59 AM.
|
|
#8
04-25-2012, 11:16 AM
|
||||
|
||||
|
Quote:
In the morning when we ski everyone is trying to all cram onto the observers seat. With the jump seat we could put in the bow wind blocker and keep the window closed. I think I'm gonna try to build one.
|
|
#9
04-25-2012, 11:24 AM
|
||||
|
||||
|
Different kind of seat. The newer boats had slots in the base so that a seat could slide out. If you want to save weight, you can cut the entire base out of styrofoam and reinforce the seat back somehow.
Alternatively, for about $200, you could buy a used Nautique jump seat. They are a little shorter in the base, but they get the job done well. I used one for several years before I built the one above. Whatever weight it added didn't affect the slalom weight in my old boat. By the way, this is what the OEM jump seat for an old 205 looked like.
__________________
Previous: 1993 Prostar 205 Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG. FAQ Tyler Ski Club To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.
|
|
#10
04-25-2012, 11:35 AM
|
||||
|
||||
|
Quote:
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
