Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-08-2012, 02:55 AM
Thaiwake Thaiwake is offline
TT Regular
Join Date: Jul 2010
Boat: Mastercraft X Star 2004, Indmar MCX 5.7L
Location: Southeast
Posts: 42
Water in oil


I am having trouble with my 2004 MCX on my X Star. I bought the boat after it had been run in saltwater and have been restoring the engine. I put an orca cooling system in it that runs coolant through the engine block and raw water through the heat exchanger and out the exhaust.

I think it is the exhaust cooling water backing up in the engine. I did a compression test and found no compression on the number 3 cylinder. Took the head off and found an intake valve stuck open.

The other cylinders were fine but I am thinking that because of the lack of pressure from this cylinder the exhaust cooling water has been sucked back into the engine and mixed with the oil. I had new head gaskets and can't see any external cracks or damage to the block, although I can't be sure there isn't anything internal.

Looking back down the cast iron exhausts, which are also new, I can see rusty water droplets both outside the jacket and inside. There shouldn't be water running inside so I can only assume that it is somehow getting there from the outside of the exhaust.

Is it likely that the engine can suck water if there is a lack of compression on only one cylinder?

Does anyone else have any idea on how water can be getting into the oil?

Thanks in advance!
Reply With Quote

compression, mcx, oil, valve, water

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 01:01 PM.