Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-07-2011, 10:18 AM
jpcarter jpcarter is offline
TT Regular
 
Join Date: Apr 2010
Boat: 2007 Mastercraft X2 SS MCX
Location: Southeast
Posts: 36
Question Where's the diagnostic port on a '07 X2 SS MCX

Where is the diagnostic port located on an '07 X2 SS with an MCX? I borrowed a Diacom code reader setup & want to scan & diagnose the codes. Just don't want to hunt & seek for 30 minutes trying to find the jack.

The "Check Engine" indicator came on last summer with it's accompanying audio warning on the MCX equipped 2007 X2 SS. Was able to turn off the indicator and alarm by hitting the display selector, but it came on again and again - and only under load.

Oil pressure was normal (40-60) as was the engine temp (~160). No unusual sounds. No power loss. Idle and acceleration all normal.

Tried unplugging the battery overnight. No effect.
Tried cycling the engine from cold to running temps multiple times. No effect.
Reply With Quote
 

Tags
check engine, check_engine, code, diagnostic, mcx

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 08:38 PM.