Go Back   TeamTalk > General MasterCraft Topics > General Discussion

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-30-2010, 06:01 PM
DavidMCX30's Avatar
DavidMCX30 DavidMCX30 is offline
TT Regular
 
Join Date: Jul 2010
Boat: 2002 MasterCraft X30
Location: Midwest
Posts: 77
x30 exhuast manifold temp variences

Just bought a 2002 x-30 this spring and loving it! Weíve done a lot of work on the boat but here is one problem we haven't cracked....we blew out an impeller at Lake Wawasee a few weeks ago while on vacation. The folks at the marina -- whom I like and trust -- replaced the impeller and did the standard blowing out of hoses and whatnot. However, the temperature in my port manifold was still high Ė 160 degrees vs. 100 degrees on the starboard manifold. They went back in and rechecked twice more for obstructions but found none. We went round and round on what the cause could be, with lots of varying opinions from various dealers. Ultimately, they called Indmar and tech support told them this variance in manifold temperatures was OK. So, we chose to leave it alone. The boat seems to be running fine. But Iím still left wondering if it is OK or if I could be doing harm? Iíve searched the discussion board but havenít found this exact topic covered. Any thoughts? Thanks!
Reply With Quote
 

Tags
manifold, temperature, x30

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:58 PM.