Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-30-2008, 08:38 AM
Roonie's's Avatar
Roonie's Roonie's is offline
MC Devotee
 
Join Date: Sep 2006
Boat: 2007 MC X2, RTP-1 5.7L 310 HP 1.5:1, 14.25 x 14.5 XMP OJ Prop, bimini, depth finder, and table, teak platform, White/viper red
Location: Pacific Northwest
Posts: 1,601
Thanks for the tips. I can still change out the quick connects to the 90 degrees one since I still have to install the left rear bag (They ran out of stock but should have it this week). Good tip on the pinched hose. It felt like it had room but it was for sure a tight fit. I will probably do the same and cut a little u-shaped piece out of the kick panel.

I am also getting the wake surf sac (another 700#) for the left side which will be filled manually with the pump so the wake should be unbelievable as I will have about 2438 #'s just on the left side and KGB/bow. That should be plenty of wake for surfing.
Reply With Quote
 

Tags
fly high, x2 ballast

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:03 AM.