Go Back   TeamTalk > General MasterCraft Topics > General Discussion

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 07-27-2008, 08:12 PM
JimN's Avatar
JimN JimN is offline
MC Master Poster
 
Join Date: Jul 2004
Posts: 11,637
Shine a light into the area toward the stern and use a mirror to watch the raw water pump's mounting plate as it spins. If it looks like it's off-center, that will need to be adjusted and is what I was referring to when I told you to loosen the bolts. I have seen them really well-centered and also some that were incredibly off-center. If it stays off-center, it's a bad thing and you'll be going through the same drill at some point in the future. As I said, the off-center pump is what broke the bracket. Look at the odd hole in the pump mounting plate (if it has one)- it should be over a hole in the pulley and balancer (the part you're calling a flywheel).

Last edited by JimN; 07-27-2008 at 08:14 PM.
Reply With Quote
 

Tags
impeller, overheating, water pump

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:39 PM.