Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Upholstery

Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-2005, 11:55 AM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Custom Jump Seat Project -- Prostar 205

Okay, so for the last couple of years, I've been searching for an OEM jump seat for the walk through of my 93 Prostar 205. MC sure must not have sold many of these because I've only seen a picture of one of them apart from the 93 brochure. For the last year or so, I've been making do with a SN jump seat I picked up second hand. It's functional, but shorter than the observer seat in my boat. Okay, I'm anal and it just doesn't look perfect.

So in April, I had an idea. If they don't make the OEM seat anymore, maybe I can still get the skins and work backwards. I was right. Lex at Rambo Marine got me the OEM skins (with accent color on the seat back). In the box they remained until I had some spare time.

Last week, I built a base and had the skins stuffed. I made it from plywood. Using the seam dimensions and the dimensions of the walk through and observer seat, I cut the sides first and added a frame for support afterwards. I had to do some trial and error with the backrest angle. I wasn't true to the design of the original seat completely. Rather, I added a step on the bow like a smaller version of the 197. I also hinged the seat back, so I could store a cooler under it, as well as the seat bottom (so people wouldn't step on the cushion when they go up to the bow. I put some extra support under the seat base, added a plywood top, and covered it in non-skid. I also added a pair of cupholders (only one pictured). The curve on the base was tricky. Stacking plywood would cause it to be heavier than it already was. So I sandwiched 3/4" pieces of styrofoam insulation. As I feared though, contact cement eats styrofoam. So I remembered, if you can't duck it, fu..ggitabout it. I wrapped my sandwiched foam in duck tape and cemented that to the side piece to get the right contour. It's purely for show and bears no load.

All in all, it turned out better than I expected. If anyone is interested, I can get the dimensions.

It wasn't cheap though. The skins alone were $220. Foam was another $25. Wood, cupholder inserts, marine carpet, non-skid, hinges, etc. It all adds up. In the end, I gotta say it's worth it for me.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.

Last edited by east tx skier; 10-12-2005 at 12:03 PM.
Reply With Quote
  #2  
Old 10-12-2005, 11:57 AM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Just enough room for our small cooler. The integrated cooler just sounded like a hassle. Access to the people in the bow didn't work out either. Just couldn't get the hinged piece to gel.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.
Reply With Quote
  #3  
Old 10-12-2005, 11:58 AM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Here's the step. No more stepping on the seats and no more asking people not to step on the seat. Just flip it and they get the idea. Now the problem becomes how to remind them that they can't do dips on a circa 93 windshield.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.
Reply With Quote
  #4  
Old 10-12-2005, 12:00 PM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Just a little view from the top. I initially planned to shoehorn one cupholder into this rather small panel. My wife complimented my handy work and added, "Where's yours"? So I installed the second one last night. It's driving me nuts they they didn't end up being as symetrical as I'd like, but I'll live. Also, I still have some trim work to do around the hinges.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.
Reply With Quote
  #5  
Old 10-12-2005, 12:01 PM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Last one. This is the view from the bow. A rather small carpeted step. Any bigger and I'd need a crew to take it out. Wood is heavy, but it works well and is strong.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.
Reply With Quote
  #6  
Old 10-12-2005, 12:12 PM
bcampbe7 bcampbe7 is offline
MC Addict
 
Join Date: Jul 2004
Boat: Tubtime Tugboat
Location: In front of my PC
Posts: 5,268
Send a message via MSN to bcampbe7
Looks great Doug
__________________
If my words don't make sense, try reading them backwards.
Reply With Quote
  #7  
Old 10-12-2005, 12:15 PM
east tx skier's Avatar
east tx skier east tx skier is offline
MC Hero
 
Join Date: Jul 2004
Boat: 1998 Ski Nautique
Location: End of my rope.
Posts: 25,360
Thanks, unfortunately, since things got a little "Texas cold" last weekend, I couldn't get more than 1 person to come skiing with me.

/Edit

By request. These are the dimensions that I used to get started. I had to trim things up in the end, but hopefully, this will make a good template for someone.
Attached Images
 
__________________
Previous: 1993 Prostar 205

Red 1998 Closed Bow Ski Boat, Ford 351, 310 hp, Acme 4 blade, Perfect Pass SG.

FAQ


Tyler Ski Club


To me, this forum is about love of inboard boats. It is about the sharing of information and, on a good day, some humor. It is not about post count, brand of boat, or any other superfluous labels that lend themselves to a false sense of superiority. Please, respect one another, try to pass on accurate information, and keep your eye on the ball.

Last edited by east tx skier; 02-18-2006 at 08:14 PM.
Reply With Quote
  #8  
Old 10-12-2005, 12:15 PM
erkoehler's Avatar
erkoehler erkoehler is offline
MC Master Poster
 
Join Date: Aug 2004
Boat: 2008 MasterCraft ProStar 197
Location: Bloomingdale, IL
Posts: 14,473
Send a message via AIM to erkoehler Send a message via MSN to erkoehler
Eastie,

Nice work! Looks good, and as close to OEM as you can get.
__________________
www.lauderdalelakesmarina.com
Reply With Quote
  #9  
Old 10-12-2005, 12:16 PM
furevo's Avatar
furevo furevo is offline
TT Regular
 
Join Date: Oct 2004
Boat: MC, S&S, 83
Location: CA
Posts: 72
VERRRY NICE WORK!
If that law thing doesn't work out, maybe you could learn 'tuck & roll' too
;-)
Reply With Quote
  #10  
Old 10-12-2005, 12:20 PM
Kevin 89MC's Avatar
Kevin 89MC Kevin 89MC is offline
MC Devotee
 
Join Date: Aug 2005
Boat: 1989 Prostar 190, 351 Indmar
Location: Twin Cities, MN
Posts: 1,083
Doug, excellent work! That really looks great! You have the best of both worlds - bow access when needed and a wide bench for optimum viewing. Very cool! I've been thinking of doing something similar (only easier) for a jump seat behind my driver's seat - my closed bow has very little seat space when skiing. Maybe I'll hire you! Any chance you'd sell the SN seat?
Kevin
__________________
1989 ProStar 190 with "Safe T Top", 351 Ford, GT 40 heads painted Ford Blue, Elec. Ign, 1:1, 720 hours, 4 blade prop, PP 6.5, removable platform brackets, custom color from factory, hot water shower, Boat Buddy & LED lights on trailer
2010 D3 Z7, 2 @ 32 off, 34 mph so far
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:39 AM.