Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Thread Tools Display Modes
Old 06-04-2014, 01:48 AM
GoBolts's Avatar
GoBolts GoBolts is offline
TT Regular
Join Date: Apr 2014
Boat: 2013 X-30
Location: The 801
Posts: 45
Shower Installation

I bought a HeterCraft shower (no pump) and I am going to attempt a self install on my 2013 X30 with the 6.0 Ilmor. I am curious where any of you have spliced into the Hot and Cold lines on this particular engine and any tips you have. I installed a shower on my 2001 Nautique but that particular shower had much better instructions than the HeaterCraft version.
"If it fly's, floats or fornicates, rent it. Owning is way too expensive."

-some guy I should have listened to a long time ago.
Reply With Quote
Old 06-04-2014, 02:58 AM
wheelerd's Avatar
wheelerd wheelerd is offline
MC Devotee
Join Date: Dec 2007
Boat: 2005 X2
Location: Central Alberta, Canada
Posts: 1,289
On mine, hot comes off the starboard side of the engine block using the drain plug hole. (it's a quick release fitting which makes it easy to winterize.) Cold is T'eed off the raw water intake hose and then goes to a pump under the rear seat.
2005 X2, Viper Red, MCX, OJ TZ-X5 prop, PPass, rear 750 sacs, KGB, IBS, Bennett Wake Plate, custom wake shaper
(previous) 2001 X5, 1991 TriStar 190
Reply With Quote

heatercraft, ilmor, installation, shower, x30

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 05:03 AM.