Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-15-2014, 01:42 PM
Jeff d Jeff d is offline
MC Devotee
 
Join Date: May 2010
Boat: 2000 230 VRS
Location: Southeast
Posts: 1,205
So, if you want to buy a setup that can be filled with a portable pump now and then plumbed in later here's what I'd do.

If you're a big surfer then get this:
http://www.wakemakers.com/fly-high-j...t-package.html

If it's mostly for wakeboarding with a little bit of surfing get this and save $80:
http://www.wakemakers.com/fly-high-f...t-package.html

Then get this integrated bow sac:
http://www.wakemakers.com/fly-high-i...d-bow-sac.html


That will get you going but you certainly will not be able to fill either of those rear sacs full for wakeboarding. You'd be way too rear heavy. So, you'd probably just going to be limited to filling the rear 40-60% depending on if you can get a person or two to sit in the bow.

You will be able to fill that one side full plus the bow sac mostly or completely full for surfing. You'll have to play with how much to fill the front.

Get used to that for a while. If you want to go bigger then get this to put inside your ski locker:
http://www.wakemakers.com/fly-high-tube-sac.html

That weight towards the front will allow you to add more to the rear sacs for wakeboarding. You still will likely not be able to fill them completely. Also, at this point (Possibly even before this point) you'll need to start considering a new prop since your takeoff speed will start to suffer.

Then you'll need to buy this (OJ 722 14.75 X 15.5 LC 1 1/8" 4-blade):
http://www.wakemakers.com/oj-522-propeller.html

Also, at some point you may want something like this Fat Brick to be able to adjust for people weight or just to stick up in the nose of the boat when nobody wants to sit up there:
http://www.wakemakers.com/fly-high-fat-brick.html

Somewhere during that evolution you're probably going to decide you either need to plumb in this stuff or get another portable pump because you're spending 30+ minutes setting up and 30+ minutes breaking it down every time you take the boat out. It's not cheap to buy all of the pumps, hose, fittings, switches and wiring and takes a lot of time. It also takes a lot of balls to drill a bunch of holes in the bottom of the hull for intake and the sides of the hull for overflow/drain. I don't have a firm number documented on what it took me.

As you can see you can spend quite a bit of money here.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 11:56 PM.