Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Appearance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-23-2014, 06:51 AM
JamesL JamesL is offline
TT Enthusiast
Join Date: Mar 2014
Boat: mastercraft X46 2016 6.2
Location: ohio
Posts: 226
underwater lights no drilling

So I wanted to install some underwater lights without drilling into the hull, this is what I came up with. I mounted two small plates that hang down from the swim platform and ran the wires through a water sealed cord grip and drain plug I made with some hard plastic. from there I mounted a terminal block on the inside of the boat on the plastic divider along side the engine then ran wires to an empty switch on the dash. I can take more pictures if anyone is interested
Attached Images
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 01:40 AM.