Installing carpet snaps in an X2

lentiman · #1 03-06-2014, 11:13 AM

So, got my boat. It has snap in carpet. However, the snaps that screw into the floor were never installed. They are currently sitting in a baggy in the glove box. Why? Hell if I know. To install them do I just screw them into the floor? Do I need to pre-drill? Anything else? I figure this is an easy job that I'm well up for.

bturner2 · #2 03-06-2014, 12:26 PM

Are the snaps in the carpet? You would think that this would be a real easy thing to do but I spent a lot time getting mine installed. Even bough the expensive special tool. This was my second set of carpet so I had the snaps in the floor and had to match the one in the carpet to the ones in the floor.

You'll need to drill a pilot hole and even then I would consider using a counter sink to bevel the top of the hole so you don't end up chipping the gel coat when you run the screw into the floor.

lentiman · #3 03-06-2014, 12:39 PM

Quote:

Originally Posted by bturner2

Are the snaps in the carpet? You would think that this would be a real easy thing to do but I spent a lot time getting mine installed. Even bough the expensive special tool. This was my second set of carpet so I had the snaps in the floor and had to match the one in the carpet to the ones in the floor.

You'll need to drill a pilot hole and even then I would consider using a counter sink to bevel the top of the hole so you don't end up chipping the gel coat when you run the screw into the floor.

The snaps are in the carpet, but not in the floor. It should be a simple job to go around with a sharpie and mark out where all the snaps go and then drill the pilot holes.

Aric'sX15 · #4 03-06-2014, 05:06 PM

I thought the carpet uninstalled was like an international thing only, weird that yours didnt come that way.

JohnE · #5 03-07-2014, 12:04 AM

Quote:

Originally Posted by Aric'sX15

I thought the carpet uninstalled was like an international thing only, weird that yours didnt come that way.

Snap in carpets were always dealer installed. Skidog had his dealer refrain from installing the snaps on the deck of his 07 X2. That was the first I realized it was dealer installed and wished I had held of the install on my '08.