header |
|
|
|
#1
09-22-2011, 04:26 PM
|
||||
|
||||
|
tsunami pumps
I want to put two tsunami pumps on my kgb bag. to see if I like those pumps.
Does anyone know how to wire them to my switch that I already have that I use with the jabsco ballast puppy. I am asuming you can wire it so when you flip the switch up it operates one pump, and when the switch is downit will operate the other pump. Right now up fills, and down drains on the reverable pump.
__________________
"Let me not pray to be sheltered from dangers, but to be fearless when facing them." 1999 X-star, 330 LTR, Zero FLex tower. 
|
|
#2
09-22-2011, 05:04 PM
|
||||
|
||||
|
Just put a tester on the switch and report back so we will all know the answer. I'm considering getting away from the Jabsco pumps as well.
__________________
New interior is in, now it's time to get on the water  2002 X Star Sold - 76 S&S
|
|
#3
09-23-2011, 01:08 PM
|
|||
|
|||
|
The rocker Switch just change polarity. So usually the jabsco pump is connected in the middle of the rocker and Battery + and - are twisted connected up and down.
Just change that battery + and - are in the middle and connect the 2 tsunami to and down. Rememnder: the Tzunamis just works in one direction! so polaritychange wont work I assume you need to add checkvalve for draining, otherwise the drain tzunami will suck air over the other Tsuami and you wont get out the water ... put give it a try cheers Captain Fronk
|
|
#4
09-23-2011, 01:25 PM
|
|||
|
|||
|
Tsunamis are aerator based pumps - not impellar based - so they will not suck air. However they do not prevent air, or water for that mater from migrating in or out.
|
|
#5
09-29-2011, 01:55 PM
|
||||
|
||||
|
I thank you for the answers. But my electronics is limited.
I was hoping for a diagram to show me what wires for one pump, and what wires for the other pump. Yes I know the aeriator pumps only pump one way.
__________________
"Let me not pray to be sheltered from dangers, but to be fearless when facing them." 1999 X-star, 330 LTR, Zero FLex tower.
|
|
#6
09-29-2011, 01:55 PM
|
||||
|
||||
|
Yews they will need check valves. or mechanical valves to turn before you fill or empty
__________________
"Let me not pray to be sheltered from dangers, but to be fearless when facing them." 1999 X-star, 330 LTR, Zero FLex tower.
|
|
#7
01-08-2012, 05:09 PM
|
||||
|
||||
|
Anyone ever disassemble a tsunami pump. Mine has a bad connection internal to the pump. Thought I'd ask before figuring it out the hard way.
__________________
99 MariStar 230 Sport LTR 330
|
|
#8
01-08-2012, 05:25 PM
|
|||
|
|||
|
Attwood has some diagrams, etc, but it may not be the detail of which you are looking.
Click around ==> http://www.attwoodmarine.com/store/p...ami-Bilge-Pump It's all I got... .
__________________
93 190 . Hypocrites, boot lickers, and crybabies…the world is full of them…. just look around - near-by . Duraflap / Kaydenco aren't worth a hoot Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8  Quote:
|
|
#9
01-08-2012, 05:55 PM
|
||||
|
||||
|
Was looking for info on how to disassemble the top part to get to the motor connections. If I move the wire right at the pump it will start working as soon as I let go it quits.
First time filling fatsac's I was thinking this thing takes forever, didn't realize the pump had quit working.
__________________
99 MariStar 230 Sport LTR 330
|
|
#10
01-08-2012, 07:00 PM
|
||||
|
||||
|
http://www.wakemakers.com/johnson-ul...last-pump.html
Wakemakers sells Johnson pumps....better specs than Jabsco....and cheaper too.
__________________
I was njskier on here.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
