View Single Post
  #7  
Old 03-19-2013, 04:37 PM
Rockman's Avatar
Rockman Rockman is offline
MC Maniac
 
Join Date: Aug 2004
Boat: '95 BF200 Yamaha ProV 200, '94 PS190 LT1 1:1
Location: SW Burbs of Chi-Town
Posts: 3,413
Quote:
Originally Posted by Ski-me View Post
Do you just want a Lowrance or will another brand work? Thru hull or just epoxied in the bilge area? I did the epoxy method and then put the water temp sensor in place of one of the speedo pickups.

http://www.boatersland.com/far-13852.html
Jeff, I would prefer to just epoxy the depth finder in the bilge area...I will look at the Faria as you and Doug have mentioned. I need to replace both speedo pickups so I will just to the depth guage install at the same time.
__________________
Reply With Quote