View Single Post
  #4  
Old 07-16-2012, 01:52 PM
BallBushing's Avatar
BallBushing BallBushing is offline
TT Enthusiast
 
Join Date: May 2010
Boat: 1999 Maristar 210 VRS
Location: Northeast
Posts: 219
Quote:
Originally Posted by Retoxtony View Post
I have exactly the same problem with my boat. I tried using tie wraps, wire, elastics and tape trying to get it to hold in place but it would still cut out atleast once every time we took the boat out. I found that it wasn't the connector not being pushed in far enough, it was the actual pins inside the connector. I pulled it apart and bent things to make better contact and its been good so far. It hasn't happened in the last 15 hours i put on the boat so i think i have the issue solved. Once i park the boat for the winter i'm going to pull out the connector and find a replacement just to make sure the problem doesnt happen again.
To confirm, did you bend things inside the black connector? I'm thinking that would be easiest.
Reply With Quote