View Single Post
  #8  
Old 07-24-2013, 01:52 AM
Redstorm Redstorm is offline
TT Enthusiast
 
Join Date: Oct 2011
Boat: Matercraft Prostar205v
Location: northwest
Posts: 299
Don't know if you have the same type of rudder. Mine has a zerck fitting to grease the rudder shaft with a pin hole located at the base of the shaft under the hull. As your greasing the shaft look for a stream of grease to exit the pin hole. Do you have a zerck fitting on your steering box/rudder shaft?? There should be 4 screws under the boat at the rudder. Remove and drop the rudder.

I believe there is thread on here with photos. Do a search under steering / stiff steering.

Last edited by Redstorm; 07-24-2013 at 02:10 AM.
Reply With Quote