Thread: hum question
View Single Post
  #8  
Old 01-17-2007, 02:15 AM
prostar205's Avatar
prostar205 prostar205 is offline
MC Devotee
 
Join Date: Aug 2004
Boat: 2002, X30, L-18
Location: Bothell, WA
Posts: 1,765
If you are talking about your center drain plug, then YES, I did it on my '95 PS205. Here is what I did.

I took a male-male NPT pipe that was about 3-inches long and threaded from the inside of the boat into the female threads inbedded into the hull of the boat. I then threaded a brass 90 degree ball value onto the pipe. This gave me the ability to turn the flow of water off. Next, I thread a Rule 1000 GPH bilge pump onto the ball valve. Finally, a 1" hole was connected to the bilge and feed two Fly Hi Side sacs. It worked great. I had another bilge pump for dumping the water out of the sacs.

Is that what you were inquiring about?
__________________
2002, X30, L-18, Red Metal Flake (the possessed boat)
Reply With Quote