View Single Post
Old 01-19-2011, 11:54 AM
Sodar's Avatar
Sodar Sodar is offline
MC Master Poster
Join Date: Nov 2004
Boat: '07 ProStar 197 w/ MCX
Location: Seal Beach, CA
Posts: 11,843
Originally Posted by Double D View Post
I hope that is not the only support your going to use to grab the nose.... My trailers original design only had a similar pad like that for the nose and under the nose of my boat was beat to he** because every time I would unload it, it would smack down on it.

I ended up putting a drive on style vertical V-pad like you see on most of the Nautique trailers and removed that setup all together. Love it!!

Pic#1 Shows Old Setup
Pic#2 Shows the added bow support down low
Pic#3 Shows the new drive in V-Pads for the nose.

He has a V-pad in addition to the roller. This is how the MC trailers have been set up since the trailer change in '93.

My '96 had the same set-up and worked great! Since your trailer is not an OEM trailer, you probably needed the added support and uprights to make it work.

2007 ProStar 197
1996 ProStar 190
Reply With Quote