View Single Post
Old 06-16-2013, 10:25 AM
Spork's Avatar
Spork Spork is offline
MC Maniac
Join Date: May 2010
Boat: Sporkcraft
Location: South
Posts: 3,633
Originally Posted by Bluccous View Post
I have a red wire and a purple under one terminal. The purple was going to the coil and the red was going to the choke. The other side of the resistor has nothing on it and I believe that's why my coil is burning up so often. Where should the other wire go on the resistor? To the alternator? Or the starter selinoid? Thanks for the reply by the way!
Get your dvom out and see what voltage you have on the red/ purple wires.

In your case the RED wire same as choke goes on one side terminal but you need some sort of 12v input to resistor, and the Purple wire on the other terminal that goes to the positive coil.

I assume you have a PCM

PCM diagram (similar but you get the idea)
Attached Images

Last edited by Spork; 06-16-2013 at 10:43 AM.
Reply With Quote