View Single Post
  #212  
Old 12-08-2013, 01:45 PM
Snipe's Avatar
Snipe Snipe is offline
MC Fanatic
 
Join Date: Nov 2012
Boat: 1998 ProStar 190
Location: Three Lakes,WI/summer;Menomonee Falls,WI/winter
Posts: 751
Quote:
Originally Posted by Worthing skier View Post
Hello All


Fitted in the new throttle cable , but I was not happy with the feel and operation of the lever so I have pulled it completely bits to find 3 broken springs all causing different issues .

1. Spring at the lower part of the lever handle broken , with this broken it allows the lever to go in and out of gear without using the safety pull up lever .

2.Horizontal spring inside small gearbox broken ,this pushes on a detente ball which gives the feel when you have selected forward or reverse ,I could not feel the point when a gear had been selected.

3. Spring on outer throttle cable slider broken , this was allowing the throttle cable to pull before a gear had been fully engaged.

This may help if you have these sort of issues .


Kevin
Great tip........as always the pictures really help.
Reply With Quote