View Single Post
  #209  
Old 12-08-2013, 11:51 AM
Worthing skier's Avatar
Worthing skier Worthing skier is offline
TT Enthusiast
 
Join Date: May 2010
Boat: mastercraft prostar 190 1993 & 1996
Location: West Sussex , sunny Worthing
Posts: 188
Morse shift assy

Hello All


Fitted in the new throttle cable , but I was not happy with the feel and operation of the lever so I have pulled it completely bits to find 3 broken springs all causing different issues .

1. Spring at the lower part of the lever handle broken , with this broken it allows the lever to go in and out of gear without using the safety pull up lever .

2.Horizontal spring inside small gearbox broken ,this pushes on a detente ball which gives the feel when you have selected forward or reverse ,I could not feel the point when a gear had been selected.

3. Spring on outer throttle cable slider broken , this was allowing the throttle cable to pull before a gear had been fully engaged.

This may help if you have these sort of issues .


Kevin
Attached Images
  
Reply With Quote