Originally Posted by CantRepeat
160 is the point my thermostat opens. I run the engine for 10 or 15 minutes past that point. Then I drain the oil and change the filter. Once all that is done run it back up to temp +10 or 15 minutes again. I run the bucket down and then put in 6 gallons of AF. I run that into the motor and shut it down. Then all I do is pull the impeller. I never drain the water or the AF. I don't drain the water because end up pulling the hot water off of the thermostat which could allow it to close. I don't drain the AF because I want the anti corrosion of the AF in the motor.
To each their own.
Indeed...lots of ways to skin that cat. But great to hear from those that have skinned that cat year after year and have a trophy room of mounted heads to show for it.
Thanks Oz for letting me peek behind the curtain.