View Single Post
  #2  
Old 09-19-2013, 01:25 PM
epnault's Avatar
epnault epnault is offline
MC Fanatic
 
Join Date: May 2010
Boat: MasterCraft ProStar 209X9 & ProStar 190 LT1-Powerslot
Location: Twin Cities and Northern WI Cabin
Posts: 717
This is the way I do it. Here is my homemade instructions.




Step 1 - Find a 5 gallon bucket

Step 2 - Buy a 2ft section of PVC pipe
http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

Step 3 - get 2 of these couplers 2" to 1 1/4"
http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

Step 4 - Find a plastic fitting you can mount to the bottom side of your bucket that has an end that is 1 1/4 ID that you can mount to the coupler above and epoxy (or use marine GOO) to the bucket (you will need to drill a hole of course).

Step 5 - Stick a garden hose into your bucket and mount the system up to the boat-I have a DD so it was a straight shot. You may have to get creative with V-drive.
Attached Images
  
Reply With Quote